Make a Bar Top Beer Cooler

[Monty Haull]

I felt inspired by @Rush-InRoulette post on the record player.  I felt I should contribute in a similar way.

 

So, yesterday I came up with this idea for a custom bar top beer cooler.

 

 

The following components were used to create this:

Bar Counter 2 (Straight) - 1 required, 3 shown

Grocery Cooler  - 1

Stall Panel 2ft - 2

Stall Panel 1ft - 4

 

Pint Glass

Assorted beer

 

 

You do need to embed the counter and the cooler into the wall.  Keep in mind of what is on the other side.

I raised the cooler up a little to show a shelf.

 

Place the stall wall on each side of the inside portion of the cooler.  The best was to do this is to first disable grid size (F1).  The attach the stall wall via surface (F6) to the top of the cooler.  Then use shift key to bring the stall wall down.  You of course need to line up the stall wall to match of the inner wall of the cooler.  It will take a few tries.

 

Below is how they would look outside of the cooler.

Stall wall are great because you can make them any color you like.

 

Enjoy

 

[Monty Haull]

Here is the completed bar setup sans NPCs.