Vanden Posted June 12, 2019 Share Posted June 12, 2019 So for single-target powers, proc chance is pretty easy to figure out using Procs Per Minute. You just figure out how many times you can use a given power in a minute and you have a pretty good idea how likely a proc is to fire. For AoE powers, there's a whole other equation factoring the size of the AoE that there's no way that I, personally, can do in my head. Is there some kind of online calculator that will tell you the final proc chance of a proc in an AoE power? A Cheat Sheet for efficient Endurance Recovery slotting Invention Set Designer Tool Spreadsheet with every Ancillary Power Pool Link to comment Share on other sites More sharing options...
jack_nomind Posted June 12, 2019 Share Posted June 12, 2019 Here's a Wolfram Alpha converter for AoE PPM (based on the formula here). You can set T-> to the Recharge Time, C-> to Cast Time, and R-> to Radius for circular AoEs. No-Set Builds: Tanker Scrapper Brute Stalker Link to comment Share on other sites More sharing options...
Vanden Posted June 12, 2019 Author Share Posted June 12, 2019 That doesn't look like the formula on the main procs per minute page. And I'm not sure how to apply that formula's output to varying rates of procs per minute? A Cheat Sheet for efficient Endurance Recovery slotting Invention Set Designer Tool Spreadsheet with every Ancillary Power Pool Link to comment Share on other sites More sharing options...
Vanden Posted June 12, 2019 Author Share Posted June 12, 2019 I tried plugging the formula from the procs per minute page into WolframAlpha. I've never used it before, so I may have the syntax wrong or something. Anyway, I was trying to find out if an Obliteration Proc is worth putting in Lightning Rod, in light of its enormous radius. Here's what I have. P is Procs per minute of the proc, T is recharge time, C is activation time, R is radius (which I just guessed at, because the info window only tells you the activation range of the power), and A is the width of the cone (360 since it's a PBAoE). And the result is there's about a 50% chance of the proc going off? Is that right? A Cheat Sheet for efficient Endurance Recovery slotting Invention Set Designer Tool Spreadsheet with every Ancillary Power Pool Link to comment Share on other sites More sharing options...
jack_nomind Posted June 13, 2019 Share Posted June 13, 2019 That doesn't look like the formula on the main procs per minute page. And I'm not sure how to apply that formula's output to varying rates of procs per minute? That formula is i23. One of the significant i24 changes was to update it and apply it universally to all procs. As far as I know, we're using the i24 formula; if we aren't, then PPM aren't even relevant to non-Attuned sets anyway. Here's what I have . . . P is Procs per minute of the proc, T is recharge time, C is activation time, R is radius (which I just guessed at, because the info window only tells you the activation range of the power), and A is the width of the cone (360 since it's a PBAoE). And the result is there's about a 50% chance of the proc going off? Is that right? I dunno, man, I didn't do it. If the formula's not right the results aren't, and I haven't actually tested the formula. For what it's worth, that sounds in the ballpark to me; the total time for the power is nearly a minute (you're .2 off on the cast time, but w/e), it's got a target cap of 10, the game doesn't linearly discount by target cap, and it's telling you it'll affect ~4.5 targets per minute on a ~3.5ppm baseline proc. No-Set Builds: Tanker Scrapper Brute Stalker Link to comment Share on other sites More sharing options...
Vanden Posted June 13, 2019 Author Share Posted June 13, 2019 This is why I was hoping someone who really understands the formula had already put together a calculator, because I don't think I can trust myself to figure it out on my own. A Cheat Sheet for efficient Endurance Recovery slotting Invention Set Designer Tool Spreadsheet with every Ancillary Power Pool Link to comment Share on other sites More sharing options...
MrAxe Posted June 29, 2019 Share Posted June 29, 2019 Is it better to slot a proc in a single target or PBAoE attack? Link to comment Share on other sites More sharing options...
Bopper Posted June 30, 2019 Share Posted June 30, 2019 Is it better to slot a proc in a single target or PBAoE attack? The answer to that question depends on the enhanced recharge of the power, the cast time of the power, the radius of the PBAoE attack power, and the number of targets the PBAoE can hit. Feel free to check out this thread for some of the current findings with the PPM mechanization. What Proc and powers are you considering? I can help more with that information. PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
MrAxe Posted June 30, 2019 Share Posted June 30, 2019 Is it better to slot a proc in a single target or PBAoE attack? The answer to that question depends on the enhanced recharge of the power, the cast time of the power, the radius of the PBAoE attack power, and the number of targets the PBAoE can hit. Feel free to check out this thread for some of the current findings with the PPM mechanization. What Proc and powers are you considering? I can help more with that information. I'm looking to slot the 'Chance for +Res (All)' proc from the Superior Might of The Tanker set. I'm Psi Melee and thinking about putting it in either Mass Levitate (the PBAoE) or Greater Psi Blade. Link to comment Share on other sites More sharing options...
Bopper Posted June 30, 2019 Share Posted June 30, 2019 I'm looking to slot the 'Chance for +Res (All)' proc from the Superior Might of The Tanker set. I'm Psi Melee and thinking about putting it in either Mass Levitate (the PBAoE) or Greater Psi Blade. You should definitely put it in your Mass Levitate. Since you're looking to only affect yourself, having up to 10 opportunities to proc is better than 1 opportunity. That said, if it came down to a single boss, and you have no other minions to proc off of, then single target would be optimal. But generally speaking, go PBAoE. And if you can, minimize the enhanced recharge in the power to better improve the proc performance per activation. PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
MrAxe Posted June 30, 2019 Share Posted June 30, 2019 I'm looking to slot the 'Chance for +Res (All)' proc from the Superior Might of The Tanker set. I'm Psi Melee and thinking about putting it in either Mass Levitate (the PBAoE) or Greater Psi Blade. You should definitely put it in your Mass Levitate. Since you're looking to only affect yourself, having up to 10 opportunities to proc is better than 1 opportunity. That said, if it came down to a single boss, and you have no other minions to proc off of, then single target would be optimal. But generally speaking, go PBAoE. And if you can, minimize the enhanced recharge in the power to better improve the proc performance per activation. Makes sense. Looks like I'll put it in Mass Levitate. Thanks for the advice. :) Link to comment Share on other sites More sharing options...
Bopper Posted June 30, 2019 Share Posted June 30, 2019 I'm looking to slot the 'Chance for +Res (All)' proc from the Superior Might of The Tanker set. I'm Psi Melee and thinking about putting it in either Mass Levitate (the PBAoE) or Greater Psi Blade. You should definitely put it in your Mass Levitate. Since you're looking to only affect yourself, having up to 10 opportunities to proc is better than 1 opportunity. That said, if it came down to a single boss, and you have no other minions to proc off of, then single target would be optimal. But generally speaking, go PBAoE. And if you can, minimize the enhanced recharge in the power to better improve the proc performance per activation. Makes sense. Looks like I'll put it in Mass Levitate. Thanks for the advice. :) Before you do, I just noticed something. Since the Proc is 5 PPM, you can actually maintain a 90% chance to proc if you keep the recharge enhancing below 80%. As for Mass Levitate, if you had the same 80% recharge slotted, you would need to hit 3 targets to get to 90%. So definitely keep that in mind. However, if you're looking to use Superior ATO and 6 slot it, you will have a recharge of approximately 100%. That would drop your probability with the ST to 83.3% chance to proc, while the PBAoE will have a 49% chance to proc off each target. If you hit 3, your chances of Proc'ing at least once is 86.8%, with 5 targets it's 96.6%. I also see that it stacks, so perhaps if you hit more than 1 target in the attack, you will stack with the one attack. That would be ideal. So in the end, if you plan to need it for mobs, definitely put it into the PBAoE. For a ST baddie (an AV that just won't go down), you might want to put it in your single target attack PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
MrAxe Posted June 30, 2019 Share Posted June 30, 2019 I'm looking to slot the 'Chance for +Res (All)' proc from the Superior Might of The Tanker set. I'm Psi Melee and thinking about putting it in either Mass Levitate (the PBAoE) or Greater Psi Blade. You should definitely put it in your Mass Levitate. Since you're looking to only affect yourself, having up to 10 opportunities to proc is better than 1 opportunity. That said, if it came down to a single boss, and you have no other minions to proc off of, then single target would be optimal. But generally speaking, go PBAoE. And if you can, minimize the enhanced recharge in the power to better improve the proc performance per activation. Makes sense. Looks like I'll put it in Mass Levitate. Thanks for the advice. :) Before you do, I just noticed something. Since the Proc is 5 PPM, you can actually maintain a 90% chance to proc if you keep the recharge enhancing below 80%. As for Mass Levitate, if you had the same 80% recharge slotted, you would need to hit 3 targets to get to 90%. So definitely keep that in mind. However, if you're looking to use Superior ATO and 6 slot it, you will have a recharge of approximately 100%. That would drop your probability with the ST to 83.3% chance to proc, while the PBAoE will have a 49% chance to proc off each target. If you hit 3, your chances of Proc'ing at least once is 86.8%, with 5 targets it's 96.6%. I also see that it stacks, so perhaps if you hit more than 1 target in the attack, you will stack with the one attack. That would be ideal. So in the end, if you plan to need it for mobs, definitely put it into the PBAoE. For a ST baddie (an AV that just won't go down), you might want to put it in your single target attack I'm going to be using it for mobs so I'll stick it in Mass Levitate. +inf Link to comment Share on other sites More sharing options...
Chaos Ex Machina Posted July 17, 2019 Share Posted July 17, 2019 Nice calculator Can We Get those Detectives a Cell Phone please? | Nature affinity costume options | Henchmen Immobilize Link to comment Share on other sites More sharing options...
Alouu Posted July 17, 2019 Share Posted July 17, 2019 Here is a Wolfram formula that I have been using. For this formula the editable values are: B: (B)ase Recharge of the power E: (E)nhancement to Recharge (As a percentage, this does not include global recharge like set bonuses & hasten.) A: (A)nimation time (Not arcana-times, the actual in game listed values) P: (P)roc Per Minute rating of the enhancement R: ®adius of the power if it is an AOE/Cone (If the power is a single target set this to 0.) C: Ar© of the cone. (360 if the power is an AOE) I put this formula together for my own purposes and after using it for a while I can say anecdotally that the numbers it spits out do seem to line up with the frequency at which things proc in game. However it is possible that the part of the formula that says (P * 1.25) should actually just be P, ie (P * 1). The reason for this is that although it was indicated by synapse that proc values would increase by 25% I cant find absolute evidence that this 25% increase was implemented into their i24 formula prior to shutdown. That said, again using anecdotal evidence only, it does appear to have been. Link to comment Share on other sites More sharing options...
Sunsette Posted July 17, 2019 Share Posted July 17, 2019 The 25% dampening to reduce the effect of being AoE was implemented, if that's what you mean. https://forums.homecomingservers.com/index.php/topic,6646.msg55599.html#msg55599 Sundered Marches: The Website | The Official Soundtrack! | The Campaign Setting! Link to comment Share on other sites More sharing options...
Alouu Posted July 17, 2019 Share Posted July 17, 2019 Nah im not referring to that, here's what im talking about: https://web.archive.org/web/20120906120102/http://boards.cityofheroes.com/showthread.php?p=4215484#post4215484 This is after much wrangling with the community over his initial proposals that he ended up at this implementation which uses enhanced recharge only rather than all recharge including global bonuses, but also has a lower boost to PPMs, 25%. Scrolling down in the same thread you can see he uses the +25% to ppm's for his other example calculations. That said I still dont know if they went ahead and slapped that +25% into the formula before shutdown or not. Link to comment Share on other sites More sharing options...
Bopper Posted July 17, 2019 Share Posted July 17, 2019 I think the Procs were updated to reflect the 25% increase. So the formula should (likely) just be P. For example, the FF proc used to be 1.5 PPM, but is now 2 PPM. That's why I assume the procs were just updated. PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now