RedDedZed Posted January 10, 2022 Share Posted January 10, 2022 Used the above link to download the builder, and Malawarebyte's blocked the site for suspected Trojan. FYI. Link to comment Share on other sites More sharing options...
RogDodge Posted February 4, 2022 Share Posted February 4, 2022 On 1/10/2022 at 1:48 PM, RedDedZed said: Used the above link to download the builder, and Malawarebyte's blocked the site for suspected Trojan. FYI. I had the same thing, you just need to add it as an exclusion in Mal. It's most likely because there is an Exe download on the main page, and Malwarebytes hates those. Although, that is your option to not add it just incase you want to be cautious. ~Everlasting~ The Emperor of Mankind - Titan Weapon/Willpower Brute Sigismund - Illusion/Radiation Controller Link to comment Share on other sites More sharing options...
Existential Adam Posted February 11, 2022 Share Posted February 11, 2022 Mids is broken. Whether it is incorrect power numbers or simply refusing to open, it is very frustrating. I can't get it to open properly utilizing the few recommendations I've seen here. Deleting it from roaming data and reinstalling does not fix it. I don't have malwarebytes. Has everyone else given up to, or is there a fix I'm missing? Link to comment Share on other sites More sharing options...
Gobbledigook Posted February 12, 2022 Share Posted February 12, 2022 I can not open Mids now that i downloaded the new version 3.2.17 i just get this pop up. 1 Link to comment Share on other sites More sharing options...
JawGod Posted February 17, 2022 Share Posted February 17, 2022 (edited) My Mids hero designer doesn't seem to want to load the window. The program launches fine and it's in my taskbar, but there's no window. I have no other screens or displays it could be on. I've tried repairing the program, and reinstalling it, but still have the same issue. EDIT: The version from the zip file seems to run fine. It's the install version that has this problem. Still not sure what's causing it. Edited February 18, 2022 by JawGod Found a solution to my problem, but not an answer to the issue. 2 1 Link to comment Share on other sites More sharing options...
Gobbledigook Posted March 13, 2022 Share Posted March 13, 2022 On 2/12/2022 at 11:48 AM, Gobbledegook said: I can not open Mids now that i downloaded the new version 3.2.17 i just get this pop up. I did a system restore and it has fixed the problem. So could just have been something at my end. Link to comment Share on other sites More sharing options...
emeyer406 Posted March 27, 2022 Share Posted March 27, 2022 when I launch mids i get the start up animation and a window on my taskbar but it will not actually load mids. i click on icon in taskbar and nothing happens. i removed and reinstalled with same effect plz help Link to comment Share on other sites More sharing options...
Bopper Posted March 27, 2022 Share Posted March 27, 2022 1 hour ago, emeyer406 said: when I launch mids i get the start up animation and a window on my taskbar but it will not actually load mids. i click on icon in taskbar and nothing happens. i removed and reinstalled with same effect plz help Search where you installed Mids and look for a file called config.json. Delete that file. Then try reopening Mids. 1 PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
emeyer406 Posted March 27, 2022 Share Posted March 27, 2022 Thank you very much that seems to have fixed it. Link to comment Share on other sites More sharing options...
Parabot Posted March 29, 2022 Share Posted March 29, 2022 I'm trying to get Mids running on my wife's Mac, running Big Sur. I'm using the instructions that crytilis posted back in Feb 2021 for installing on Catalina and Big Sur, but I'm stuck on the winding color wheel. Anyone have any luck with running Mids on a mac with Big Sur? Link to comment Share on other sites More sharing options...
Zappalina Posted April 17, 2022 Share Posted April 17, 2022 Before I reinstall this after uninstall, it says Jason Thompson I just want to make sure i downloaded from the correct link? Link to comment Share on other sites More sharing options...
Bopper Posted April 17, 2022 Share Posted April 17, 2022 Just now, Zappalina said: Before I reinstall this after uninstall, it says Jason Thompson I just want to make sure i downloaded from the correct link? You did PPM Information Guide Survivability Tool Interface DoT Procs Guide Time Manipulation Guide Bopper Builds +HP/+Regen Proc Cheat Sheet Super Pack Drop Percentages Recharge Guide Base Empowerment: Temp Powers Bopper's Tools & Formulas Mids' Reborn Link to comment Share on other sites More sharing options...
Zappalina Posted April 17, 2022 Share Posted April 17, 2022 11 minutes ago, Bopper said: You did Thank you Link to comment Share on other sites More sharing options...
Bartacus Posted June 27, 2022 Share Posted June 27, 2022 For some reason, semi-recently the Power/Slot button toggle has not worked for me, making it rather annoying to remove and add slots. Is there a fix for this? Link to comment Share on other sites More sharing options...
Hyperstrike Posted June 27, 2022 Share Posted June 27, 2022 When in doubt, and repairs don't seem to work: Make sure you have a backup of your builds folder. Uninstalling shouldn't blow it out, but I'm a paranoid sort. Download Revo Uninstaller Portable. Start up the version (x86 or x64) suitable for your Windows install. Uninstall Mids. After the uninstall, set the Scan preferences to Advanced. Select all registry entries and hit DELETE (not NEXT) NOW hit NEXT Select all left-over files and hit DELETE (again not NEXT) Download Mids Reborn FRESH from their website. Reinstall Mids. Unless you have a VERY VERY messed up Windows install, the program should be working again. If you want to be godlike, pick anything. If you want to be GOD, pick a TANK! Link to comment Share on other sites More sharing options...
Bartacus Posted June 28, 2022 Share Posted June 28, 2022 I did that and it didn't fix it 😞 i dont get it Link to comment Share on other sites More sharing options...
Hyperstrike Posted June 29, 2022 Share Posted June 29, 2022 14 hours ago, Bartacus said: I did that and it didn't fix it 😞 i dont get it Okay, if you did a total uninstall, file and registry scrub and a fresh install of Mids didn't fix it, you have something ELSE going on with your system. Are you getting error messages? If so, paste them up here. If you want to be godlike, pick anything. If you want to be GOD, pick a TANK! Link to comment Share on other sites More sharing options...
Bartacus Posted June 30, 2022 Share Posted June 30, 2022 I ended up fixing it by installing an older version of mids. Whatever installer is being used now installs a version for me that won't work with the power/slot button. No errors are happening. Button just doesn't do anything. Link to comment Share on other sites More sharing options...
Recommended Posts