Dacy

I believe I covered it at least somewhat in my video on using editor commands; I certainly remember doing a lot of work on that, but not sure what made it into the final version. If it was omitted, I am sorry. So, no, there really is no way to grab a majority of the NPCs after you place them, so the trick is to manipulate them BEFORE you place them! How you do this is by using the fact that an object orients to a surface according to how the object that it's being attached to is placed. In other words, if the floor or surface you attach to is angled, so will the thing you attach to it. So angle, raise, tilt, the surface you are using to place your NPC, then remove that surface so it looks like it's on the floor or whatever you are putting it on. Ctrl/z if it's not right, adjust, try again. Make sense? 🙂 -Dacy

Right, well..I'm not really sure it's a matter of "stoopid stuff" that's been done, I think they are wanting to not give NCSoft a reason to twitch or come against them in negotiations. If NC thinks that people are in any way profiting, or hey, maybe just ENJOYING "their" stuff, they might take it as a way to stop negotiations. I can understand, so I'll be good. 🙂 -Dacy

Still here to answer questions, and this does allow me to focus on building (and the occasional play time without editing!), so I'm good. 🙂 Thanks! -Dacy

HOWEVER.... I don’t often go over Code of Conduct, because I read it when I signed up, and I have never had anything in a code of conduct that applies to me, but that just changed. @VileTerror alerted me to the new policy on publicly uploaded videos: anything put up after tomorrow is a violation, which could get me banned. This relates to HC trying to get legit with NCSoft, who may get twitchy about the airing of content they still consider to be theirs (although I would love to argue that, in the case of the current base editor, only the setting is original. The new commands and items make the editor a whole new animal...hence, the need for the vids). Any videos up already will be left alone, but anything out after tomorrow is subject to removal and code violation. So, new videos are on indefinite hold. -Dacy

Well, that’s not precisely the situation, but thank you! No, it’s been a while since I was able to put one out, and it may be another while before I can do more, since I am quite busy. But, since I think I’ve covered the basics, there are also fewer videos that need to be made. So I was/am just explaining the slowdown. The videos I look forward to making will probably be more time consuming to do, as well; more complex with more set up than most I’ve done. I have a request for urban areas, for example, and I was thinking of doing base tours of a selection of bases I think are good examples of things or inspirational , but that will definitely take time to research. So it’s just a case of things not getting done as fast as they were, at first. -Dacy

More content added. -Dacy

Finally, new stuffs. I've been so busy with base editing and family stuff, I just haven't had the time to set up and do a video, but I finally got a couple together. My computer is refusing to run the software I used to do them on, so it doesn't help that, to get a video done, I have to move to an unfamiliar computer, but oh well, first world problems, heh. Anyway. I've been seeing a lot of questions as to water plates, as in, can you get a full horizon of water (no, but you can get it to extend past the base plot). How do you prevent people from falling through some of the water plates, and how do you make rivers and lakes. So I did a video covering that, and then a video I've been meaning to get to for a while, covering some techniques I use to simplify and organize complex builds, including a sample build (usually I show the pieces and talk about what to do, this time I also show you what I'm doing). So, here they are, hopefully I can get more out in a month or so. (Quite busy with a build!) Working with Water Building Complex Items Hope those that need these find them useful! 🙂 -Dacy

You’re right... that hasn’t been happening. -Dacy

So, as usual, today I got transported across the base (distance covered seems to relate to my orientation at time of teleport: if I am looking nearly straight down, I only go to the base floor just below me, but it I am facing higher up, I am likely to land much farther away. Typically it switches the object I am interacting with to something in my line of sight, instead, as well. -Dacy

A place to vent, while highlighting base editing problems. Tell us what the editor did to you today that made editing more difficult!

Perhaps they stopped worrying if it worked or not, since it is obsolete. You can access your vault anytime from salvage, upper left corner. I have not put a vault in a base for a very long time, so other than that, I don’t know. -Dacy

Likely the bases you toured were built entirely above or below the base. 😊 -Dacy

Odd, indeed. Every time I’ve tried to undo, empty or full, it’s told me “nothing to undo”. So I stopped trying. I will try again and see if they fixed it! I think they are trying to fix what they can. It seems, for instance, they must not have thought that /editbase 12 was a good idea, because now that, /editbase 3, and any other combos I’ve tried above 2 no longer work to give you “editor view” in a base. Any base. Which is sad; it was cool to be able to see how something was put together. Now, if only they’d figure out how to fix that annoying teleport to the base floor you’re pointing to... -Dacy

Nice! I like the steps, too; what is that, the underside of inactive arcane inspiration bins? -Dacy

That's really interesting! Also, if clearing the map is the same amount of work as clearing a base, I understand why they did it that way.... -Dacy

Neat! I bet that's even more cool in person. 🙂 -Dacy

This might be a bit better shot of the front:

Thought I'd post a few things of what I'm currently working on, a base for the Invincible Ones (ONES-5030, Excelsior). Spaceship. So far completed front of ship, bridge with adjoining function rooms of teleporter, med bay, workshop/supply, and a science lab which will house the inspirations, once I move the front function room materials to the base. So, to enter, you'll see a non-spectacular base functions room, go to the teleporter labeled "Magical/Other" and choose "Aleph" (Or Beth, takes you to the nightclub on top, with access to the outside of ship atm). Front of ship (Alien, wanted it to look it) (Not sure why it looks a bit out of focus, I had it on visscale 10, but it's definitely better in person). This ship is built around the existing base rooms, so the bridge and bar, and eventually the arboretum and shuttle bay, are above the base, and the rest of the base is within the walls, so you must use the lifts to go between levels. Hard to decide which angle to use for bridge shot, lots to see, but here is one: Teleporters, reflecting a Star Trek influence: Medbay: Storage/workshop: Night Club, outside: (take turbo lift to Beth; Keph goes to conference/inside base bounds) And inside: And that's my file size limit, lol. 🙂 I didn't get to the Captain's quarters, the Ready room, the conference room, or engineering... Guess you'd have to come inside to see those things. 🙂 -Dacy

Awesome work!! -Dacy

Yeah, hmm...I know I said this somewhere, thought it was here! Lol. Thanks, Enabling. I've found a couple of items that seem to be bugged, and if you get anywhere near the edge of a room, they give the error. These are things that I’ve worked with before, and used at the extreme limit of “still in the room”, most notably and consistently, the AE coils. There are a few others I’ve seen give me the error when they should not be doing so, but I didn’t write them down, and they aren’t pieces I’ve used as much currently. So just so people know, this is a sometimes bug, if you are getting “can’t fit” and you think you should be able to place that piece, try a different piece there and see if it’s that place or that piece (assuming you’ve got your settings set so you should be able to place it). -Dacy

@Carandiru, no ceiling and many more things are possible now. You might want to check out some of the bases on the base "phone book", a pinned topic, or my videos on how to do this and more, also a pinned topic. 🙂 -Dacy

Ah, I was going to report the Katana invisibility bug, but I see it's here. One note to that: it IS visible during animation, just not when it's just being held after the animation is finished. -Dacy

Yay! Yeah, that happened to me while working on a video, I had this placement in the wall glitch, then when I came back to record how I approached it, poof, was gone. Glad it resolved! -Dacy

Then it’s just a wonky segment of wall. Sometimes you can get around that with the extended floor trick, sometimes it will reset itself after you’ve logged out at some point, sometimes you just have to adjust and work around it, either by moving all the items so that one fits, or by adjusting how far into the wall you place it. Sometimes you can get around some of the wonkiness by changing your view to from behind the wall, a technique I demonstrated in my video on dealing with editor quirks. I’m also quite willing to see if I can get it placed for you. -Dacy