SuperPlyx Posted April 4, 2020 Share Posted April 4, 2020 33 minutes ago, tripthicket said: Well, piffle. Windows 8.1 here If you don't mind me asking what version of Mid's are you using and if it is 2.6.0.7 how did you get .Net Framework 4.7.2 installed on a windows 8? Nothing I have tried has worked Link to comment Share on other sites More sharing options...
DreamingLove Posted April 4, 2020 Share Posted April 4, 2020 (edited) Ah, okay I figured it out. Thanks! Is there a way to zoom in and make the UI bigger? It's hard to read sometimes with everything small on the left Edited April 4, 2020 by DreamingLove Link to comment Share on other sites More sharing options...
tripthicket Posted April 4, 2020 Share Posted April 4, 2020 (edited) 41 minutes ago, SuperPlyx said: If you don't mind me asking what version of Mid's are you using and if it is 2.6.0.7 how did you get .Net Framework 4.7.2 installed on a windows 8? Nothing I have tried has worked Hero Designer v.2.6.0.7 (Database Issue: 26, Version: 20.2605) As for the .Net Framework, I tried to find where that is located, and couldn't directly read it, so can't confirm what version I'm running. Is there a difference between Windows 8 and Windows 8.1, I wonder, such that 4.7.2 will install on the latter but not the former? Do you know how I might determine what version I have? I can relate that Mids seem to be working fine for me. I even have the latest update that shows me Electrical Affinity as a powerset choice. Edited to add: Hmmmm. Checking HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full on my Windows 8.1 PC, I determine that the Release entry contains, under Data (in part): 528049. For Windows 10 (10 May 2019 update), the number would be 528040, indicating .Net Framework 4.8. For all other OS, the number is 528049. Unless I really munked up on following the instructions I found on determining my version, I have .Net Framework 4.8. ...I'm pretty sure. 🤔 Edited April 5, 2020 by tripthicket Link to comment Share on other sites More sharing options...
SuperPlyx Posted April 5, 2020 Share Posted April 5, 2020 (edited) @tripthicket Thanks for the reply,looking in registry on my pc it seems I only have .Net Framework version 4.0.....hmm,I wonder if I can try getting the versions one at a time till I get to 4.7 Edit: I was wrong I had version 4.5.1 installed. I was able to update it to 4.6.2 but when I went to install 4.7.1 I get the error ".Net Framework 4.7 is not supported on this operating system" Edited April 5, 2020 by SuperPlyx Link to comment Share on other sites More sharing options...
Felis Noctu Posted April 5, 2020 Share Posted April 5, 2020 1 hour ago, DreamingLove said: Ah, okay I figured it out. Thanks! Is there a way to zoom in and make the UI bigger? It's hard to read sometimes with everything small on the left Unfortunately not at the moment, no. The program was built for resolutions that rarely went past 1280x1024, so widescreen is something foreign to it. As it is I believe the fact that it can display relatively correctly at all is due to recent efforts? Right now the only current author of Mids who's periodically around is Pine, and from what I understand he's more of a database person than a code person. MRBU's discussed the possibility of some UI changes but we haven't set anything in stone yet. We were just kinda tossing ideas. Mids' Reborn : Hero Designer The build planner to make your awesome characters even more awesome! "... and so we went into that dark night, for we knew our dawn would come again..."~ The Meowcronomicon Link to comment Share on other sites More sharing options...
Apparition Posted April 5, 2020 Share Posted April 5, 2020 37 minutes ago, SuperPlyx said: @tripthicket Thanks for the reply,looking in registry on my pc it seems I only have .Net Framework version 4.0.....hmm,I wonder if I can try getting the versions one at a time till I get to 4.7 Edit: I was wrong I had version 4.5.1 installed. I was able to update it to 4.6.2 but when I went to install 4.7.1 I get the error ".Net Framework 4.7 is not supported on this operating system" Windows 8 hasn't been supported for years. You're going to have to either update to 8.1 or 10. Link to comment Share on other sites More sharing options...
SuperPlyx Posted April 5, 2020 Share Posted April 5, 2020 (edited) On 4/4/2020 at 8:16 PM, Apparition said: You're going to have to either update to 8.1 This did the trick,altho it took me forever to do.But thank you very much. Edited April 6, 2020 by SuperPlyx Link to comment Share on other sites More sharing options...
Papaschtroumpf Posted April 6, 2020 Share Posted April 6, 2020 For some reason today Mid's is not letting me change the Ancillary power pool after I open a build, even if I de-select all the powres from that pool. What am I missing? I'm pretty sure it ussd to work Link to comment Share on other sites More sharing options...
Caulderone Posted April 6, 2020 Share Posted April 6, 2020 1 hour ago, Papaschtroumpf said: For some reason today Mid's is not letting me change the Ancillary power pool after I open a build, even if I de-select all the powres from that pool. What am I missing? I'm pretty sure it ussd to work This sometimes happens with Snipe APPs. No easy way around it. 1 Link to comment Share on other sites More sharing options...
Papaschtroumpf Posted April 6, 2020 Share Posted April 6, 2020 I guess I'll rebuild the character from scratch, that's the "hard" way. And yes, I want to go from Soul (Moonbeam) to Mu (Zapp) Link to comment Share on other sites More sharing options...
RobRauff Posted April 8, 2020 Share Posted April 8, 2020 Sorry all if this has been answered, but I am trying to run this on a MacBook Pro and I am having some troubles. After following all steps on this thread these are the errors I am getting in this order After these errors my screen looks like this: I have followed all the steps multiple time. I have uninstalled everything, down to home-brew and reinstalled to no avail. I apologize if this has been answered already. Here are the specs for my computer: Macbook Pro (Retina, 15-inch, Mid 2014) macOS: Mojave v 10.14.6 Processor: 2.2 GHz Intel Core i7 Memory: 16 GB 1600 MHz DDR3 Graphics: Intel Iris Pro 1536 MB I have had problems with my Intel Iris before, so this is my guess, I just have no idea what to do about it. Thanks for the help in advance. Link to comment Share on other sites More sharing options...
Caulderone Posted April 8, 2020 Share Posted April 8, 2020 1 hour ago, RobRauff said: I have had problems with my Intel Iris before, so this is my guess, I just have no idea what to do about it. Thanks for the help in advance. I don't think that is related to your gpu. You might try reinstalling the .Net installer from the Mac instructions in the first post of the thread. Otherwise, if no one else chimes in here, you may need to try out making contact on the Discord linked in the first post. Lots of folks have had issues getting it to work right on Mac. Link to comment Share on other sites More sharing options...
RobRauff Posted April 8, 2020 Share Posted April 8, 2020 17 minutes ago, Caulderone said: I don't think that is related to your gpu. You might try reinstalling the .Net installer from the Mac instructions in the first post of the thread. Otherwise, if no one else chimes in here, you may need to try out making contact on the Discord linked in the first post. Lots of folks have had issues getting it to work right on Mac. I have tried reinstallation. I am not sure how to uninstall for a clean installation though using wine tricks. Do you know the command? Link to comment Share on other sites More sharing options...
Caulderone Posted April 8, 2020 Share Posted April 8, 2020 Just now, RobRauff said: I have tried reinstallation. I am not sure how to uninstall for a clean installation though using wine tricks. Do you know the command? No, sorry, I've not messed with installing Mids on a Mac, and I have no experience with Wine. If no one responds by this afternoon, I would recommend trying the Discord. 1 Link to comment Share on other sites More sharing options...
HellionZaZul.2017 Posted April 9, 2020 Share Posted April 9, 2020 hello.. ive been having an issue with mids for awhile and uninstalling and reinstalling hasent worked so far.. im tryin to rig up the pics of the errors i get when i try and use the app normally and after ive rigged it to work.. this is when i try to do it normally these are after i get it to work in a diffrent way.. sorry for the shit quality my screenshot key doesnt work Link to comment Share on other sites More sharing options...
Caulderone Posted April 9, 2020 Share Posted April 9, 2020 That looks like a permissions error to me. Uninstall the program. Reinstall it to a different location. For example, make a Games folder on your C drive, then install it there instead. That's my best guess. 1 Link to comment Share on other sites More sharing options...
HellionZaZul.2017 Posted April 9, 2020 Share Posted April 9, 2020 @Caulderone omg that worked.. im about to cry the error garbage has been divin me insane since last year TY Link to comment Share on other sites More sharing options...
Rylas Posted April 10, 2020 Share Posted April 10, 2020 Couldn't find any comments relating to this in the past couple of pages... I'm getting this message when I try to run from a fresh install: Message: Parameter is not valid. Trace: at System.Drawing.Bitmap..ctor(Sting filename) at I9Gfx.LoadEnhancements() Any idea what's gone wrong? Request hi-res icons here. Download the Icon Pack here! Link to comment Share on other sites More sharing options...
cshadow133 Posted April 11, 2020 Share Posted April 11, 2020 Greetings everyone, How are we to update Mids Reborn? I do the 'Options -> Check for Updates' but it comes back negative. Yet the version I am on is Database Issue 26, Version: 19.1021. I see someone a few posts up that has a later version. I am wondering how long it takes it to be updated from a new issue or page coming out? I would like to see the stuff and slot up a toon for the new Electricity Affinity. Can someone walk me through the update if it is different than just checking for updates? Thanks in advance. Link to comment Share on other sites More sharing options...
Redlynne Posted April 11, 2020 Share Posted April 11, 2020 10 minutes ago, cshadow133 said: Can someone walk me through the update if it is different than just checking for updates? LINK Verbogeny is one of many pleasurettes afforded a creatific thinkerizer. Link to comment Share on other sites More sharing options...
Lodestar_1977 Posted April 13, 2020 Share Posted April 13, 2020 Such a basic question. First time using this. If I add slots to a power, then change my mind. How do I undo the slots? Also... yes the updated version on the other thread. I don't know if there is a full updated version to download. As I simply can not get my head around how to update it with the patches. Link to comment Share on other sites More sharing options...
Caulderone Posted April 13, 2020 Share Posted April 13, 2020 4 minutes ago, Lodestar_1977 said: Such a basic question. First time using this. If I add slots to a power, then change my mind. How do I undo the slots? Also... yes the updated version on the other thread. I don't know if there is a full updated version to download. As I simply can not get my head around how to update it with the patches. Shift-click Not yet, but they are still working on it. 1 Link to comment Share on other sites More sharing options...
Lodestar_1977 Posted April 13, 2020 Share Posted April 13, 2020 Just now, Caulderone said: Shift-click Not yet, but they are still working on it. Perfect thanks. I tried anything but Link to comment Share on other sites More sharing options...
Clave Dark 5 Posted April 14, 2020 Share Posted April 14, 2020 18 hours ago, Lodestar_1977 said: Perfect thanks. I tried anything but You'd really think they'd put in a page of like five lines to tell you things like that, huh? :) Tim "Black Scorpion" Sweeney: Matt (Posi) used to say that players would find the shortest path to the rewards even if it was a completely terrible play experience that would push them away from the game... ╔═══════════════════════════════════════════════════════════════════════════════════╗ Clave's Sure-Fire Secrets to Enjoying City Of Heroes Ignore those farming chores, skip your market homework, play any power sets that you want, and ignore anyone who says otherwise. This game isn't hard work, it's easy! Go have fun! ╚═══════════════════════════════════════════════════════════════════════════════════╝ Link to comment Share on other sites More sharing options...
bbucklein Posted May 2, 2020 Share Posted May 2, 2020 I can't seem to get Dotnet472 to install on my MacBook Pro running OS X 10.14. It hangs while trying to install the 4.5 update. Any suggestions? Link to comment Share on other sites More sharing options...
Recommended Posts